Pushback system for storage

Drums are four per pallet and IBCs two at a time across a total of 24 pallets two deep, on two levels. 

How does it work?

Place the first pallet on the Pushback cradle, on the shelf, and push back the next pallet against the first one. When you take a pallet off of the shelf the next pallet glides forward. This is based on a safe, proven, pallet rack system including thoughtful colour coding of the internal structure to ensure correct placement.

Each unit measures 8900mm x 3200mm x 3300mm (LxDxH) in any colour scheme and made from 2.5mm profiled Steel Sheet over 50mm x 50mm x 3mm RHS tube. It is designed to comply with the Control of Pollution (Oil Storage) (England) Regulations and current Environmental and Health & Safety legislation, including Flame Arrested high and low ventilation.

There are padlockable sliding doors situated on one of the 8.9mm sides of the unit – plus a fully seam welded leak proof anti corrosive sump over the entire base area to a depth of 220mm and capacity of 6000 litres.

The company says: "The Safety Unlimited Pushback concept literally galvanises your best practice storage with a Galvanised roof and guttering and removable galvanised grid flooring, all finished in chemical/corrosion resistant paint."