ARTICLE
Firm fined for failing to keep forklift in good working order
21 January 2013
A Wakefield company has been fined for failing to keep a forklift truck in good working order, which posed a danger to workers.
A Wakefield company has been fined for failing to keep a forklift truck in good working order, which posed a danger to workers.
Traditional Slate and Stone Supplies of Horbury Bridge was prosecuted by the Health and Safety Executive (HSE) at Wakefield Magistrates' Court for breaching safety law.
The company supplies stone in flexible large bags that hold around a tonne. HSE found that a forklift truck being used on 28 May 2010 had not been maintained and that two sets of bearings holding the forks in line had collapsed.
Magistrates were told by HSE that as the forks were lowered, they could jam on the mast and then fall when dislodged, putting employees working nearby at risk of serious injury.
HSE found the forklift had been repaired on many occasions in the previous year but all the work had been reactive. The company's maintenance regime was to repair in response to breakdowns.
The company, of Bridge Road, was fined £2,000 and ordered to pay £4,138 in costs after admitting a breach of the Provision and Use of Work Equipment Regulations 1998.
After the hearing, HSE Inspector Neil Hope-Collins said: "This shows the potential dangers of relying solely on fixing things when they go wrong. All machinery should be maintained regularly to ensure it is safe to work with and near. That means looking for signs of wear and tear before they lead to an incident."
Traditional Slate and Stone Supplies of Horbury Bridge was prosecuted by the Health and Safety Executive (HSE) at Wakefield Magistrates' Court for breaching safety law.
The company supplies stone in flexible large bags that hold around a tonne. HSE found that a forklift truck being used on 28 May 2010 had not been maintained and that two sets of bearings holding the forks in line had collapsed.
Magistrates were told by HSE that as the forks were lowered, they could jam on the mast and then fall when dislodged, putting employees working nearby at risk of serious injury.
HSE found the forklift had been repaired on many occasions in the previous year but all the work had been reactive. The company's maintenance regime was to repair in response to breakdowns.
The company, of Bridge Road, was fined £2,000 and ordered to pay £4,138 in costs after admitting a breach of the Provision and Use of Work Equipment Regulations 1998.
After the hearing, HSE Inspector Neil Hope-Collins said: "This shows the potential dangers of relying solely on fixing things when they go wrong. All machinery should be maintained regularly to ensure it is safe to work with and near. That means looking for signs of wear and tear before they lead to an incident."
MORE FROM THIS COMPANY
- Firm fined for forging forklift safety document
- Haulage firm worker killed by runaway lorry
- Guide to loading bay safety
- Agency worker hand injury caused by poorly guarded palletiser
- Logistics company fined after driver suffers crush injuries
- Self-employed haulage contractor killed by reversing lorry
- Conveyor maintenance worker crushed
- Worker crushed by loaded cage trolley
- HSE issues MOD with Crown Censure over driver death
- Employee crushed after firm ignores paper reel loading advice
RELATED ARTICLES
- No related articles listed
OTHER ARTICLES IN THIS SECTION