Home>Industry Sector>Distribution>Poorly stacked pallets to blame for severe leg break
Home>Distribution>Pallets>Poorly stacked pallets to blame for severe leg break
Home>Health & Safety>Warehouse Safety>Poorly stacked pallets to blame for severe leg break
ARTICLE

Poorly stacked pallets to blame for severe leg break

24 October 2014

The UK division of a pan-European paper company has been fined for safety failings after a worker broke her leg in three places when poorly stacked pallets of paper collapsed.

The long-serving employee, who does not want to be identified, is still suffering pain and complications more than five years after the incident at Colombier (UK) in Sittingbourne on 27 May 2009.


The firm, part of the Holland-based Colombier Group, was prosecuted by the Health and Safety Executive (HSE) for failing to implement effective control measures in the stacking of heavy items.

Maidstone Magistrates Court heard (23 October) that the worker had helped to recover two pallet loads of paper that had collapsed and spilled from a stack at Colombier’s warehouse on the Eurolink Industrial Estate.

"The risk assessment did not address this particular work activity, so the actual process for controlling this risk was virtually non-existent.”


As she walked away further pallets slipped from the stack and struck her leg, causing the triple break.

HSE identified that although risks arising from falling stacks were identified by the company as a concern, the risk assessment did not address this particular work activity, so the actual process for controlling this risk was virtually non-existent. The system for stacking pallets in open areas of the warehouse did not follow HSE or industry guidance.

Magistrates were told there were two recorded incidents of stacks falling prior to the leg break incident, and that on a further three occasions the issue had been raised at management level. However, this information did not result in any practical change.

"Magistrates were told there were two recorded incidents of stacks falling prior to the leg break incident, and that on a further three occasions the issue had been raised at management level. However, this information did not result in any practical change.”


The company has since revised its management process.

Colombier (UK), of the Eurolink Industrial Estate, Castle Road, Sittingbourne, was fined a total of £30,000 and ordered to pay £4,496 in costs after pleading guilty to two breaches of the Management of Health and Safety at Work Regulations 1999.

After the hearing, HSE inspector Jan Combs commented: "Risk assessments are not a paperwork exercise, and should be used as a management tool to identify risks and trigger the need for robust systems and procedures to eliminate them from the work process – so far as it is reasonably practicable to do so. If there is a change in process, a revised risk assessment should be implemented to follow suit.

"This case should serve to remind managers of the need to be aware of what is happening in their workplace, and to react immediately if any issues are identified. Concerns about the stacking process were well known at Colombier, and yet there was no management response to protect workers until it was too late, with an experienced employee sustaining a horrific leg injury that was entirely preventable.”

The Handling & Storage Solutions Safer Logistics Campaign

Handling & Storage Solutions has launched the Safer Logistics campaign to promote health and safety awareness in logistics in 2014.


We were inspired to launch the campaign by the Health and Safety Executive encouraging all stakeholders to show leadership and ‘be part of the solution’.


It is vital to push home the message that poor health & safety practices have no place in the modern logistics world.


What you can do

Clear safety first principles are worth repeating.

- If you doubt the safety of a working practice, stop. Talk to your supervisor or manager and agree a safe way of proceeding. Don’t carry on and hope for the best.

- No matter who you are in the management structure or workforce, take responsibility for your safety, don’t assume someone else has taken care of it.


Safety in Partnership

In 2015, we are running a series of features in our magazine and across our digital platforms focusing on a number of key safety areas in association with valued industry partners.


Each issue will focus on a specific safety hot spot.


If you want to reach the Industry’s largest ABC Audited circulation of 16,000 readers with your latest products and solutions – contact us today!


January: Safety in Handling

February: Safety in Storage

March: Safety in the Warehouse

April: Safety In Training

May: Loading Bay Safety

June: Transport Safety
July / August: Forklift Safety
September: Safety in Flooring
October: Safety in Automation
November / December: Safety in Maintenance

Contact Angela Lyus on 07818 574304 / [email protected] for more details.

We’re on the look out for safety products, solutions and services that do that business, so if you are up to the challenge send material to HSS editor, Simon Duddy [email protected]


 
OTHER ARTICLES IN THIS SECTION
FEATURED SUPPLIERS
TWITTER FEED